Lemo self-locking plug electrode wire, Lemo three pin heating Customized therapy electrode cables

Classification of surface electrodes for mid low frequency therapy Surface electrodes for mid low frequency therapy can be classified according to their shape, size, material, and other aspects. The following are several common classification methods: 1. Shape classification: The shapes of surface electrodes include sheet, circle, square, ellipse, etc. Different shapes of electrodes are suitable for different parts of treatment, such as sheet electrodes for large-area treatment, circular electrodes for local treatment, etc 2. Size classification: The size of surface electrodes is usually represented by diameter or side length. Different sizes of electrodes are suitable for different areas of treatment, such as small electrodes for local treatment and large electrodes for large-area treatment. 3. Material classification: The materials of surface electrodes mainly include metal, carbon fiber, silicone, etc. Different materials of electrodes have different conductivity and application ranges. For example, metal electrodes have good conductivity and are suitable for high-frequency therapy, while carbon fiber electrodes are suitable for low-frequency therapy, etc 4. Quantity classification: The number of surface electrodes usually includes unipolar electrodes and bipolar electrodes. Monopolar electrodes are suitable for a single treatment site, while bipolar electrodes are suitable for treatment between two treatment sites. It should be noted that selecting appropriate surface electrodes requires evaluation and selection based on the patient's condition and treatment needs, while following relevant operating procedures and safety precautions to ensure maximum treatment effectiveness.

Instructions for using a beauty device 1. Before use, the face should be thoroughly cleaned to remove oil and dirt from the surface of the skin. 2. Choose the appropriate beauty device as needed and adjust the power to the appropriate level. 3. Cover the beauty device on your face and operate it according to the instructions in the user manual. After use, pay attention to cleaning the beauty device and follow the instructions for maintenance.

Step 1: Use facial mask 1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth. 2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb. Step 2: Wear a red light mask 3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated. 4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly. 5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose. Step 3: Adjust the red light mode and power 6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light. 7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level. Step 4: Use a red light mask 8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading Step 5: End of use 11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time. 12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place. 13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.