продуктови категории
Продуктови етикети
скорошни публикации
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
Категория: Медицински кабели
Свържете се с нас
Чакам вашия имейл, ние ще ви отговорим в рамките на 12 часа с ценна информация, от която се нуждаете.
СВЪРЗАНИ ПРОДУКТИ
2.0 hole ear clip wire sleep massager ear clip electrode cable
1. Electrode board interface: stable transmission, safe use, long service life
2. Product performance: environmentally friendly material, cold resistant, anti freezing and flame-retardant, wear-resistant
3. High quality materials: strong elasticity, good flexibility, anti-interference, and more stable performance
Антистатичен заземяващ кабел 4,5 мм бананова глава 90 степен лакът TO 4.0 медицинска дамска катарама
Висококачествен спирален заземителен кабел Antistat, който осигурява силна връзка със земята.
Този популярен заземяващ кабел може да бъде опънат и върнат обратно до първоначалната си дължина, спомагайки за поддържане на чиста работна зона за ефективност и комфорт. Това е първата линия на защита срещу потенциални ESD щети.
Disposable negative electrode board with pin insertion for adult therapy circuit board
1. Classified by material: Circuit negative plates can be divided into two types: metal negative plates and conductive adhesive negative plates. Metal negative plates are usually made of metals such as copper and aluminum, which have good conductivity and stability; The conductive adhesive negative electrode plate is covered with a layer of metal foil on the conductive adhesive, which has good flexibility and adhesion.
2. Classified by shape: Circuit negative plates can be divided into various shapes such as circular, square, rectangular, и т.н. Different shapes of negative plates are suitable for different parts and populations.
3. Classified by purpose: The negative plate of the circuit can be divided into two types: disposable and reusable. Disposable negative plates are usually used for disposable electrocardiogram examinations and can be discarded after use; Reusable negative plates can be reused after cleaning and disinfection.
It should be noted that when using the negative electrode plate of the circuit, it is necessary to strictly follow the operating procedures and disinfection requirements to ensure the safety and accuracy of the inspection. At the same time, the appropriate negative electrode plate should be selected according to the patient's condition, and installed and used correctly to avoid unnecessary risks and complications.
Red blue light household face LED color light infrared silica gel facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
USB A TO 4.0mm snap button one to two ECG snap button therapy massage lead wire
ECG cable is considered as the most important medical cable. If you are going to choose ECG cables, you first need to grab information about the same. It means that you need to learn how it actually works.
What is the function of ECG cable? Answering this question is needed if you don’t want to regret on your decision at later stage. That’s why here you need to know about the functionalities of ECG cable.
Function of the ECG Cable
Before you start unveiling the secrets of ECG functionality, you first need to know about the same. What exactly an ECG cable is for.
Actually, an ECG patient or medical device is made for non-invasive human heart monitoring. The main objective behind this device is to diagnose heart problems in patients.
Now, come to the main thing i.e. ECG cables. Actually, this cable is connected to electrodes. These electrodes are positioned on specific areas on patient’s body to monitor and detect the electrical activity of the heart.
The main function of ECG cable is to transmit the electrical activity of heart back to connected ECG device. Now, the device produces result, which is analysed and diagnosed by doctors or other medical professionals for potential hear problems.