English
العربية
Български
Čeština
Dansk
Nederlands
Suomi
Français
Deutsch
Magyar
Italiano
日本語
한국어
Português
Română
Русский
Slovenščina
Español
Svenska
Tiếng Việt
4.0 Banana Plug TO 4.0 Electrode Female Buckle Medical Cable Therapy Spring Wire Telescopic Spiral Wire
The connector specification: 4.0mm banana plug nickel plated+4.0 all inclusive copper female buckle nickel plated
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: customized nickel plating, gold plating/salt spray 24H, salt spray 48H
Length, color, and plug can all be customized
Kontaktujte nás
Čekání na váš e-mail, odpovíme vám v rámci 12 hodiny s cennými informacemi, které jste potřebovali.
SOUVISEJÍCÍ PRODUKTY
Red blue light household face LED color light infrared silica gel facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
Silicone negative electrode plate Electrode Conducting Resin for Electrode Therapy Lead Wire
Single-circuit negative plates are a common form of circuit negative plate, and they are integrated with conductive metal foils, which are connected to the high-frequency electrosurgical unit via a circuit. The high-frequency electrosurgical unit detects whether it is safe and compatible based on capacitance effect. When there is no negative plate in the high-frequency electrosurgical unit, the unit will sound an alarm, reminding medical staff that the negative plate is not connected. Although this single-circuit negative plate is simple, it has certain drawbacks; it can only detect whether the circuit negative plate is connected, but not whether the negative plate is connected to the skin and effective.
USB A TO 4.0mm snap button one to two ECG snap button therapy massage lead wire
ECG cable is considered as the most important medical cable. If you are going to choose ECG cables, you first need to grab information about the same. It means that you need to learn how it actually works.
What is the function of ECG cable? Answering this question is needed if you don’t want to regret on your decision at later stage. That’s why here you need to know about the functionalities of ECG cable.
Function of the ECG Cable
Before you start unveiling the secrets of ECG functionality, you first need to know about the same. What exactly an ECG cable is for.
Actually, an ECG patient or medical device is made for non-invasive human heart monitoring. The main objective behind this device is to diagnose heart problems in patients.
Now, come to the main thing i.e. ECG cables. Actually, this cable is connected to electrodes. These electrodes are positioned on specific areas on patient’s body to monitor and detect the electrical activity of the heart.
The main function of ECG cable is to transmit the electrical activity of heart back to connected ECG device. Now, the device produces result, which is analysed and diagnosed by doctors or other medical professionals for potential hear problems.