Connector socket Terminal Appearance and Function

Terminal Block is a modular connector engineered for a reliable connection that secures two or more wires together, and manages complex electrical circuits. They are also used for connecting wires to ground or earth connections. A terminal is the point at which a conductor from a component, device or network comes to an end. Terminal may also refer to an electrical connector at this endpoint, acting as the reusable interface to a conductor and creating a point where external circuits can be connected.

China 16mm/12mm/19mm/ 22mm metal button switch with wire seat connector terminal socket connector factory and manufacturers

JST SH1.0 1mm 28AWG Female To Female Jack Wire Cable Connector Double Plug 2/3/4/5/6 Pin JST Connector Socket Terminal

Waterproof Connectors, 5Pin Way Car Electrical Connector,with Wire 16 AWG Marine for Car, Truck, Boat, Motorcycle and Other Wire

Contact pressure regulated connector:
The terminal plating is available in two types: gold and tin. The optimal contact pressure can be obtained by adjusting the auxiliary spring gap (each position from A to C). At the same time, gold-plated terminals are also equipped with high contact pressure terminals and standard contact pressure terminals according to the purpose of use.
• The anti-overstress structure refers to the protective structure designed to minimize damage to the main contacts caused by foreign matter or prying.
(D-2 S, M/D-3 S, M, l, 2l, 3L/D-5 S, M socket terminals)

Connector Features (D-3000 Series Illustration)
Plug/socket contact
The plug side adopts a lamellar insert method, and the socket side adopts a supported socket.
(hereinafter referred to as socket) method. Its structure is very resistant to vibrations. (See the picture on the left) The contact method adopts a highly reliable 3-point contact method.

Fixing of connector terminals and housing
The terminal is fixed by hanging from the shell, so the terminal itself is not locked and can be easily inserted into the shell without the risk of falling off. There is a crisp locking sound when the shell is inserted, making it easy to confirm insertion. The terminals can be pulled out using special tools.

4 Pin Connector Waterproof Connector 4 Wire Auto Electrical Connector Plug Male Female Quick Disconnect Connector 16AWG Cable

6 Pin Way 16 AWG Car Waterproof Electrical Connector Plug with Wire AWG Marine Pack of 5, Plug Connectors

2 3 4 5 6 7 8 9 10 12 Pin Car SM2.54mm Air-to-Plug Connector Plug Terminal Wire with Cable Head L Light Harness Sensor

Confirmation mark of connector
Fixing of terminals and shell
Contact Pressure Markings…High contact pressure terminals only have an “H” marking on the bottom of the receptacle terminal. (The unmarked ones are standard contact pressure terminals) (D-3 terminal only)
• Plating identification…marked with the following number on the side of the terminal so that
The type of coating and the thickness of the coating are clearly visible. The digital and terminal type
The additional number of the number is the same.
-2…gold plated 0.38μm thick
-3…gold plated 0.76μm thick
-5…Tin plating
• Universal marking of terminals and tools
Identify the terminal series (D-1/D-2/D-3/D-4/D-5) and wires respectively.
diameter markings (SS, S, M, l) to prevent contact between terminals and hand tools
Doesn’t match the extraction tool.
Wire diameter identification is as follows:
D-1
S……AWG#30-28
M……AWG#28-22
L……AWG#28-22
2L……AWG#22-18
D-2
S……AWG#28-24
M……AWG#22-18
D-3
S……AWG#28-24
M……AWG#24-20
L……AWG#20-16
2L……AWG#16-14
3L……AWG#16-14
D-4
M……AWG#16-14
L……AWG#14-12
D-5/D5α
SS……AWG#20-16
S……AWG#16-14
M……AWG#12-10
L……AWG#8

Connectors are easy to plug in and out
• The connector is easy to insert and unplug, and has a crisp locking sound when mated.
• To pull out the connector, just grab the two latches on both sides of the housing to unlock it easily.
(D-3100/D-3200/D-4000/D-5200 series)
• For safety reasons, the corners of the housing are fully rounded to prevent insertion and removal.
Injury to hands when removing the connector.

Vertical head directionality
Vertical plug heads are marked with orientation (concave) to prevent incorrect installation on the circuit board.

Connector housing protecting terminals
The horizontal plug head adopts full surface coverage to protect the solder terminals.

Connector housing highlights
Strengthen the firmness of circuit boards
• Considering robot automatic placement, both vertical and horizontal plug heads are equipped with reinforced fixing feet.
• Especially for the horizontal version, reinforcement feet are installed at the bottom of the housing. Compared with the current method, the fixation installed near the insertion opening of the socket housing can resist the swing caused by the cable after installation.

Anti-vibration mechanism of connector
• Both the plug and socket housings have multiple rib structures (concave and convex), which are anti-vibration structures, allowing the socket housing to be fully inserted into the plug housing, and there will be no more shaking between the housings.

Connector mis-mating prevention structure
Some products (D-1200D/D-2100S/D-2100D/D-3100S/D-3100M/D-3200S/D-3200M/D-3200T/D-4000/D-5200S/D-5200M) have errors to prevent The key position of the plug-in structure. By using key bits, other products with the same number of digits can be prevented from being mis-inserted. (See P.121 for key plugs, only applicable to D2000 series and P.121, only applicable to D3000 series)

Obvious circuit identification
• Plug and socket housings have circuit markings to facilitate easy crimping of cables.