製品カテゴリ
- 医療用ケーブル 24
- USB4ケーブル 11
- POGOピンケーブル 4
- 防水ケーブル 27
- タイプCケーブル 15
- USB5 Cables 9
- USB スクリュー ロック ケーブル 26
- ハブ 14
- USBアングルケーブル 27
製品タグ
最近の投稿
Red blue light household face LED color light infrared silica gel facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
カテゴリ: 医療用ケーブル
お問い合わせ
メールを待っています, 以内に返信させていただきます 12 必要な貴重な情報を何時間も入手できる.
関連製品
Disposable negative electrode board with pin insertion for adult therapy circuit board
1. Classified by material: Circuit negative plates can be divided into two types: metal negative plates and conductive adhesive negative plates. Metal negative plates are usually made of metals such as copper and aluminum, which have good conductivity and stability; The conductive adhesive negative electrode plate is covered with a layer of metal foil on the conductive adhesive, which has good flexibility and adhesion.
2. Classified by shape: Circuit negative plates can be divided into various shapes such as circular, square, rectangular, 等. Different shapes of negative plates are suitable for different parts and populations.
3. Classified by purpose: The negative plate of the circuit can be divided into two types: disposable and reusable. Disposable negative plates are usually used for disposable electrocardiogram examinations and can be discarded after use; Reusable negative plates can be reused after cleaning and disinfection.
It should be noted that when using the negative electrode plate of the circuit, it is necessary to strictly follow the operating procedures and disinfection requirements to ensure the safety and accuracy of the inspection. At the same time, the appropriate negative electrode plate should be selected according to the patient's condition, and installed and used correctly to avoid unnecessary risks and complications.
ECG リード線 3.5 ミリメートル 3 極オス肘に 3.5 ミリメートル治療メスバックル 4.0 ミリメートルバックルワイヤー
コネクタ仕様: 3.5mm audio male+4.0 all inclusive copper buckle with nickel plating
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: カスタマイズされたニッケルメッキ, 金メッキ/塩水噴霧 24H, salt spray 48H
Product testing: 短絡, 導電率, 絶縁完全検査, 真新しい精密ケーブル試験機, reliable and safe use
OEM/ODM: 外観, ワイヤー仕様, 色, ハードウェアヘッド, 等. 顧客の要求に応じてカスタマイズおよび生産することができます.
Silicone negative electrode plate Electrode Conducting Resin for Electrode Therapy Lead Wire
Single-circuit negative plates are a common form of circuit negative plate, and they are integrated with conductive metal foils, which are connected to the high-frequency electrosurgical unit via a circuit. The high-frequency electrosurgical unit detects whether it is safe and compatible based on capacitance effect. When there is no negative plate in the high-frequency electrosurgical unit, the unit will sound an alarm, reminding medical staff that the negative plate is not connected. Although this single-circuit negative plate is simple, it has certain drawbacks; it can only detect whether the circuit negative plate is connected, but not whether the negative plate is connected to the skin and effective.