제품 카테고리
- 의료용 케이블 24
- USB4 케이블 11
- POGO 핀 케이블 4
- 방수 케이블 27
- C형 케이블 15
- USB5 Cables 9
- USB 나사 잠금 케이블 26
- 허브 14
- USB 앵글 케이블 27
제품 태그
최근 게시물
Silicone negative electrode plate Electrode Conducting Resin for Electrode Therapy Lead Wire
Single-circuit negative plates are a common form of circuit negative plate, and they are integrated with conductive metal foils, which are connected to the high-frequency electrosurgical unit via a circuit. The high-frequency electrosurgical unit detects whether it is safe and compatible based on capacitance effect. When there is no negative plate in the high-frequency electrosurgical unit, the unit will sound an alarm, reminding medical staff that the negative plate is not connected. Although this single-circuit negative plate is simple, it has certain drawbacks; it can only detect whether the circuit negative plate is connected, but not whether the negative plate is connected to the skin and effective.
범주: 의료용 케이블
문의하기
이메일을 기다리는 중, 이내에 답변해 드리겠습니다. 12 필요한 귀중한 정보를 몇 시간 동안.
관련 제품
ECG 리드선 3.5MM 3극 남성 팔꿈치 3.5MM 치료 여성 버클 4.0MM 버클 와이어
커넥터 사양: 3.5mm audio male+4.0 all inclusive copper buckle with nickel plating
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: 맞춤형 니켈 도금, 금도금/염수분무 24시간, salt spray 48H
Product testing: 단락, 전도도, 단열재 전체 검사, 새로운 정밀 케이블 시험기, reliable and safe use
OEM/ODM: 모습, 와이어 사양, 그림 물감, 하드웨어 헤드, 등. 고객 요구 사항에 따라 맞춤화 및 생산 가능.
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.