Product Categories
- Medical cables 24
- USB4 Cables 11
- POGO Pin Cables 4
- Waterproof cables 27
- Type C cables 15
- USB5 Cables 9
- USB Screw Lock Cables 26
- Hubs 14
- USB angle cables 27
Product Tags
Recent Posts
DC2.35 safety plug TO 3.5 electrode female buckle medical cable
Compatibility Increases the Performance of ECG Device
If you want to get best performance i.e. accurate results out of an ECG device, you need to use ECG wires or cables that should compatible with the device. Of course, compatibility increases the overall functionality of the device.
Category: Medical cables
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
2.0mm round tube end TO 2.0 electrode needle low frequency therapy accessory cable
Classification of surface electrodes for mid low frequency therapy
Surface electrodes for mid low frequency therapy can be classified according to their shape, size, material, and other aspects. The following are several common classification methods:
1. Shape classification: The shapes of surface electrodes include sheet, circle, square, ellipse, etc. Different shapes of electrodes are suitable for different parts of treatment, such as sheet electrodes for large-area treatment, circular electrodes for local treatment, etc
2. Size classification: The size of surface electrodes is usually represented by diameter or side length. Different sizes of electrodes are suitable for different areas of treatment, such as small electrodes for local treatment and large electrodes for large-area treatment.
3. Material classification: The materials of surface electrodes mainly include metal, carbon fiber, silicone, etc. Different materials of electrodes have different conductivity and application ranges. For example, metal electrodes have good conductivity and are suitable for high-frequency therapy, while carbon fiber electrodes are suitable for low-frequency therapy, etc
4. Quantity classification: The number of surface electrodes usually includes unipolar electrodes and bipolar electrodes. Monopolar electrodes are suitable for a single treatment site, while bipolar electrodes are suitable for treatment between two treatment sites. It should be noted that selecting appropriate surface electrodes requires evaluation and selection based on the patient's condition and treatment needs, while following relevant operating procedures and safety precautions to ensure maximum treatment effectiveness.
Disposable negative electrode board with pin insertion for adult therapy circuit board
1. Classified by material: Circuit negative plates can be divided into two types: metal negative plates and conductive adhesive negative plates. Metal negative plates are usually made of metals such as copper and aluminum, which have good conductivity and stability; The conductive adhesive negative electrode plate is covered with a layer of metal foil on the conductive adhesive, which has good flexibility and adhesion.
2. Classified by shape: Circuit negative plates can be divided into various shapes such as circular, square, rectangular, etc. Different shapes of negative plates are suitable for different parts and populations.
3. Classified by purpose: The negative plate of the circuit can be divided into two types: disposable and reusable. Disposable negative plates are usually used for disposable electrocardiogram examinations and can be discarded after use; Reusable negative plates can be reused after cleaning and disinfection.
It should be noted that when using the negative electrode plate of the circuit, it is necessary to strictly follow the operating procedures and disinfection requirements to ensure the safety and accuracy of the inspection. At the same time, the appropriate negative electrode plate should be selected according to the patient's condition, and installed and used correctly to avoid unnecessary risks and complications.
ECG lead wire 3.5MM three pole male elbow TO 3.5MM therapy female buckle 4.0MM buckle wire
The connector specification: 3.5mm audio male+4.0 all inclusive copper buckle with nickel plating
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: customized nickel plating, gold plating/salt spray 24H, salt spray 48H
Product testing: Short circuit, conductivity, insulation full inspection, brand new precision cable testing machine, reliable and safe use
OEM/ODM: Appearance, wire specifications, colors, hardware heads, etc. can be customized and produced according to customer requirements.
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
White shielding 3.5mm four pole extended audio male TO 4.0 female buckle cable
Conductor material: UL standard · Bare copper · Tin plated copper/Customizable conductor material
The connector plating: customized nickel plating, gold plating/salt spray 24H, salt spray 48H
Product testing: Short circuit, conductivity, insulation full inspection, brand new precision cable testing machine, reliable and safe use
OEM/ODM: Appearance, wire specifications, colors, hardware heads, etc. can be customized and produced according to customer requirements