Categorias de Produtos
- Medical cables 24
- USB4 Cables 11
- POGO Pin Cables 4
- Waterproof cables 27
- Type C cables 15
- USB5 Cables 9
- USB Screw Lock Cables 26
- Centros 14
- USB angle cables 27
Etiquetas de produto
Postagens recentes
2.0mm round tube end TO 2.0 electrode needle low frequency therapy accessory cable
Classification of surface electrodes for mid low frequency therapy
Surface electrodes for mid low frequency therapy can be classified according to their shape, size, material, and other aspects. The following are several common classification methods:
1. Shape classification: The shapes of surface electrodes include sheet, circle, square, ellipse, etc.. Different shapes of electrodes are suitable for different parts of treatment, such as sheet electrodes for large-area treatment, circular electrodes for local treatment, etc.
2. Size classification: The size of surface electrodes is usually represented by diameter or side length. Different sizes of electrodes are suitable for different areas of treatment, such as small electrodes for local treatment and large electrodes for large-area treatment.
3. Material classification: The materials of surface electrodes mainly include metal, carbon fiber, silicone, etc.. Different materials of electrodes have different conductivity and application ranges. For example, metal electrodes have good conductivity and are suitable for high-frequency therapy, while carbon fiber electrodes are suitable for low-frequency therapy, etc.
4. Quantity classification: The number of surface electrodes usually includes unipolar electrodes and bipolar electrodes. Monopolar electrodes are suitable for a single treatment site, while bipolar electrodes are suitable for treatment between two treatment sites. It should be noted that selecting appropriate surface electrodes requires evaluation and selection based on the patient’s condition and treatment needs, while following relevant operating procedures and safety precautions to ensure maximum treatment effectiveness.
Categoria: Medical cables
Contate-nos
Aguardando seu e-mail, responderemos dentro de 12 horas com informações valiosas que você precisava.
PRODUTOS RELACIONADOS
Disposable neutral electrode plate, high-frequency electric knife negative electrode plate
Disposable neutral negative electrode and high-frequency electrode. Using imported materials, it has excellent anti allergy and conductivity, and will not cause any irritation to young skin. It has superior conductivity and is compatible with various brands of RF beauty devices. The product uses imported adhesive to enhance the breathability of the wing protection material, greatly improving the firmness of the electrode sheet adhesion
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
Silicone negative electrode plate Electrode Conducting Resin for Electrode Therapy Lead Wire
Single-circuit negative plates are a common form of circuit negative plate, and they are integrated with conductive metal foils, which are connected to the high-frequency electrosurgical unit via a circuit. The high-frequency electrosurgical unit detects whether it is safe and compatible based on capacitance effect. When there is no negative plate in the high-frequency electrosurgical unit, the unit will sound an alarm, reminding medical staff that the negative plate is not connected. Although this single-circuit negative plate is simple, it has certain drawbacks; it can only detect whether the circuit negative plate is connected, but not whether the negative plate is connected to the skin and effective.
Therapy instrument wire button type 3.5mm massager patch electrode wire
1. Electrode board interface: stable transmission, safe use, long service life
2. Product performance: environmentally friendly material, cold resistant, anti freezing and flame-retardant, wear-resistant
3. High quality materials: strong elasticity, good flexibility, anti-interference, and more stable performance