English
العربية
Български
Čeština
Dansk
Nederlands
Suomi
Français
Deutsch
Magyar
Italiano
日本語
한국어
Português
Română
Русский
Slovenščina
Español
Svenska
Tiếng Việt
Beauty device phototherapy mask, deep cleaning, wrinkle fading, fatigue relief
Instructions for using a beauty device
1. Before use, the face should be thoroughly cleaned to remove oil and dirt from the surface of the skin.
2. Choose the appropriate beauty device as needed and adjust the power to the appropriate level.
3. Cover the beauty device on your face and operate it according to the instructions in the user manual.
After use, pay attention to cleaning the beauty device and follow the instructions for maintenance.
Phototherapy in beauty devices can effectively improve skin problems such as acne, aging, vân vân. From a technical perspective, different wavelengths of light can affect skin layers at different depths, improving internal skin problems and making the skin surface more beautiful.
Liên hệ với chúng tôi
Đang chờ email của bạn, chúng tôi sẽ trả lời bạn trong vòng 12 giờ với thông tin có giá trị bạn cần.
SẢN PHẨM LIÊN QUAN
Tấm điện cực trung tính dùng một lần, tấm điện cực âm dao điện tần số cao
Điện cực âm trung tính dùng một lần và điện cực tần số cao. Sử dụng nguyên liệu nhập khẩu, nó có khả năng chống dị ứng và dẫn điện tuyệt vời, và sẽ không gây kích ứng cho làn da trẻ. Nó có độ dẫn điện vượt trội và tương thích với nhiều thương hiệu thiết bị làm đẹp RF khác nhau. Sản phẩm sử dụng keo nhập khẩu giúp tăng cường độ thoáng khí cho vật liệu bảo vệ cánh, cải thiện đáng kể độ cứng của độ bám dính của tấm điện cực
Factory wholesale red blue light infrared light mask beauty silicone spectrum facial mask instrument
Step 1: Use facial mask
1. Apply facial mask: select a facial mask product suitable for your skin, evenly apply it on your face, and avoid eyes and mouth.
2. Waiting for absorption: according to the time requirements in the instructions of the facial mask, wait for the facial mask to fully penetrate and absorb.
Step 2: Wear a red light mask
3. Open the red light mask: Press the switch button below to ensure that the red light mask is activated.
4. Wear a face mask: Gently place the mask on the face from top to bottom, ensuring that the facial skin fits snugly.
5. Fixed face mask: Adjust the appropriate fixing position according to the tightness of the fixing strap on the face mask to ensure that the face mask is stable and not loose.
Step 3: Adjust the red light mode and power
6. Choose the red light mode: According to your needs, select the corresponding button on the mask to switch between different red light modes. There are generally modes such as red light irradiation, red light flickering, and alternating red and blue light.
7. Adjust the red light power: Based on your skin sensitivity, adjust the power button on the mask and select the appropriate red light power level.
Step 4: Use a red light mask
8. Start using: Press the start button on the mask below, and the red light mask will start working. 9. Exposure time: Set the appropriate red light surface usage time according to the recommendations in the product manual. It is generally recommended to use it for 15-30 minutes each time. 10. Relax and Rest: During work on a red light surface, you can choose to close your eyes to relax or engage in other leisure activities such as listening to music or reading
Step 5: End of use
11. Timed shutdown: Ensure that the red light mask is turned off by pressing the shutdown button located below after the end of its usage time.
12. Remove the face mask: Carefully remove the red light mask from the face and place it in a clean place.
13. Facial care: wash the face with clean water, and then apply appropriate face cream or lotion for facial care and water locking.
Silicone negative electrode plate Electrode Conducting Resin for Electrode Therapy Lead Wire
Single-circuit negative plates are a common form of circuit negative plate, and they are integrated with conductive metal foils, which are connected to the high-frequency electrosurgical unit via a circuit. The high-frequency electrosurgical unit detects whether it is safe and compatible based on capacitance effect. When there is no negative plate in the high-frequency electrosurgical unit, the unit will sound an alarm, reminding medical staff that the negative plate is not connected. Although this single-circuit negative plate is simple, it has certain drawbacks; it can only detect whether the circuit negative plate is connected, but not whether the negative plate is connected to the skin and effective.